• OpenAccess
    • List of Articles Abadan Plain

      • Open Access Article

        1 - Geochemical evaluation of the Sarvak and Fahliyan reservoirs crude oils by biomarker data in one of the Abadan Plain oilfields
        ELham Asadi. Mehmandosti Seyed Ali Moallemi Mahnaz amirhoseyni Azizolah Habibi
        In this study, 8 crude oil samples of the Sarvak (5 samples) and Fahliyan (3 samples) reservoirs from one of the main oilfields of the Abadan Plain was assessed geochemically by Liquid Chromatography, Gas Chromatography (GC) and Gas Chromatography Mass Spectrometry (GC- More
        In this study, 8 crude oil samples of the Sarvak (5 samples) and Fahliyan (3 samples) reservoirs from one of the main oilfields of the Abadan Plain was assessed geochemically by Liquid Chromatography, Gas Chromatography (GC) and Gas Chromatography Mass Spectrometry (GC-MS) techniques. Types of crude oils of the Sarvak reservoir are Paraffinic Naphtenic and Aromatic Intermediate and are Paraffinic type for the Fahliyan reservoir crude oils. Biomarker ratios of saturate fractions such as variation of Pr/nC17 and Ph/nC18 ratios and Pr/Ph versus C27/C29 (20R) Sterane diagram indicate formation of source rock in reducing marine environment for both oil reservoirs. Furthermore, high amount of C29 Sterane in compare to C27 and C28 Steranes show that organic matter of source rock was formed in marine environment with terrestrial kerogen input. High amount C29 Hopane versus C30 Hopane, variation C27 (Dia/Dia+Reg) Steranes versus Pr/(Pr+Ph), low amount of Diasteranes versus Steranes and variation Sterane/Hopane versus C27/C29 Steranes show carbonate- shale lithology for source rock of studied oils. Depending on high amount of resin, scattering of normal alkanes, high values of Pr/nC17 and Ph/nC18 and higher UCM in compare to other samples, K11 and K15 samples of the Fahliyan reservoir and B5 sample of the Sarvak reservoir demonstrate slight to moderate biodegradation while B19 sample show very slight biodegradation. According to variation of Pr/nC17 vs. Ph/nC18, C29 Sterane 20S/(20S+20R) vs. C32 Hopane 22S/(22S+22R), C29 Sterane 20S/(20S+20R) vs. C29 Sterane αββ/(αββ+ααα) samples from both reservoirs denote early oil window formation. Samples from the Fahliyan reservoir have high thermal maturity in compare to the Sarvak reservoir samples. Manuscript profile
      • Open Access Article

        2 - Geochemical evaluation of the Sarvak and Fahliyan reservoirs crude oils by biomarker data in one of the Abadan Plain oilfields
        Seyed Ali Moallemi Mahnaz Amir hosyeni Azizolah Habibi
        In this study, 8 crude oil samples of the Sarvak (5 samples) and Fahliyan (3 samples) reservoirs from one of the main oilfields of the Abadan Plain was assessed geochemically by Liquid Chromatography, Gas Chromatography (GC) and Gas Chromatography Mass Spectrometry (GC- More
        In this study, 8 crude oil samples of the Sarvak (5 samples) and Fahliyan (3 samples) reservoirs from one of the main oilfields of the Abadan Plain was assessed geochemically by Liquid Chromatography, Gas Chromatography (GC) and Gas Chromatography Mass Spectrometry (GC-MS) techniques. Types of crude oils of the Sarvak reservoir are Paraffinic Naphtenic and Aromatic Intermediate and are Paraffinic type for the Fahliyan reservoir crude oils. Biomarker ratios of saturate fractions such as variation of Pr/nC17 and Ph/nC18 ratios and Pr/Ph versus C27/C29 (20R) Sterane diagram indicate formation of source rock in reducing marine environment for both oil reservoirs. Furthermore, high amount of C29 Sterane in compare to C27 and C28 Steranes show that organic matter of source rock was formed in marine environment with terrestrial kerogen input. High amount C29 Hopane versus C30 Hopane, variation C27 (Dia/Dia+Reg) Steranes versus Pr/(Pr+Ph), low amount of Diasteranes versus Steranes and variation Sterane/Hopane versus C27/C29 Steranes show carbonate- shale lithology for source rock of studied oils. Depending on high amount of resin, scattering of normal alkanes, high values of Pr/nC17 and Ph/nC18 and higher UCM in compare to other samples, K11 and K15 samples of the Fahliyan reservoir and B5 sample of the Sarvak reservoir demonstrate slight to moderate biodegradation while B19 sample show very slight biodegradation. According to variation of Pr/nC17 vs. Ph/nC18, C29 Sterane 20S/(20S+20R) vs. C32 Hopane 22S/(22S+22R), C29 Sterane 20S/(20S+20R) vs. C29 Sterane αββ/(αββ+ααα) samples from both reservoirs denote early oil window formation. Samples from the Fahliyan reservoir have high thermal maturity in compare to the Sarvak reservoir samples. Manuscript profile
      • Open Access Article

        3 - Interpretation of sedimentary environment and factors affecting reservoir quality in upper Sarvak Formation in one the oil fields of Abadan plain
        Mohammad Hossein Saberi Bahman Zarenezhad الهام  اسدی Nasim Rahmani
        The Sarvak Formation of the Albian-Turonian Formation is one of the most important hydrocarbon reservoirs in south and southwest of Iran. In this study, in order to assess the reservoir quality, from a petrographic study and porosity and permeability data, an important More
        The Sarvak Formation of the Albian-Turonian Formation is one of the most important hydrocarbon reservoirs in south and southwest of Iran. In this study, in order to assess the reservoir quality, from a petrographic study and porosity and permeability data, an important well in one of the oil fields of Abadan plain has been used. Based on microscopic studies, 13 microfacies have been identified in the form of Four facies tidal flat, lagoon, shoal and open marine for Sarvak Formation deposits in the studied oil field, indicating that the upper part of the Sarvak Formation is deposited in a homoclinal carbonate ramp. Among the identified diagenetic processes, dissolution, cementation, dolomitization, fracturing, compaction, neomorphism, micritization, bioturbation, pyritization, hematitization, phosphatization and silicification are mentioned. Diagenetic processes of Sarvak Formation occurred in three marine, meteoric and burial environments. Among the dissolution and fracturing diagenetic processes, the most important role has been in increasing the reservoir quality, and cementation and compaction have been the most important factors in reducing reservoir quality. Sequence stratigraphy studies identified third order sedimentary sequences of the age of Turonian, Late Cenomanian, and Middle Cenomanian, and studied the facies and diagenetic processes within its framework. Correlation of porosity and permeability data of the core showed that the reservoir quality in this formation was influenced by facies and diagenetic processes. So that the microfacies containing the rudist have the highest reservoir quality. Due to the diagenetic processes, sedimentary and porosity and permeability data, the facies shoal and open marine to the land have the best reservoir quality. Manuscript profile
      • Open Access Article

        4 - Interpretation of sedimentary environment and factors affecting reservoir quality in upper Sarvak Formation in one the oil fields of Abadan plain
        Arad Kiani Mohammad Hossein Saberi Bahman Zare nejad Elham Asadi Nasim Rahmani
        The Sarvak Formation of the Albian-Turonian Formation is one of the most important hydrocarbon reservoirs in south and southwest of Iran. In this study, in order to assess the reservoir quality, from a petrographic study and porosity and permeability data, an importan More
        The Sarvak Formation of the Albian-Turonian Formation is one of the most important hydrocarbon reservoirs in south and southwest of Iran. In this study, in order to assess the reservoir quality, from a petrographic study and porosity and permeability data, an important well in one of the oil fields of Abadan plain has been used. Based on microscopic studies, 13 microfacies have been identified in the form of Four facies tidal flat, lagoon, shoal and open marine for Sarvak Formation deposits in the studied oil field, indicating that the upper part of the Sarvak Formation is deposited in a homoclinal carbonate ramp. Among the identified diagenetic processes, dissolution, cementation, dolomitization, fracturing, compaction, neomorphism, micritization, bioturbation, pyritization, hematitization, phosphatization and silicification are mentioned. Diagenetic processes of Sarvak Formation occurred in three marine, meteoric and burial environments. Among the dissolution and fracturing diagenetic processes, the most important role has been in increasing the reservoir quality, and cementation and compaction have been the most important factors in reducing reservoir quality. Sequence stratigraphy studies identified third order sedimentary sequences of the age of Turonian, Late Cenomanian, and Middle Cenomanian, and studied the facies and diagenetic processes within its framework. Correlation of porosity and permeability data of the core showed that the reservoir quality in this formation was influenced by facies and diagenetic processes. So that the microfacies containing the rudist have the highest reservoir quality. Due to the diagenetic processes, sedimentary and porosity and permeability data, the facies shoal and open marine to the land have the best reservoir quality. Manuscript profile